PenangAPRS Track

My position About ☰

reset

2E0XLS-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 2E0XLS-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1735217751	14.5 Volts	20.25 Deg.C
1735217746	13.68 Volts	20.25 Deg.C
1735217714	13.68 Volts	19.76 Deg.C
1735217640	14.03 Volts	19.76 Deg.C
1735217627	14.91 Volts	19.27 Deg.C
1735217583	16.14 Volts	18.78 Deg.C
1735217472	15.65 Volts	18.29 Deg.C
1735217423	12.34 Volts	17.81 Deg.C
1735217390	12.45 Volts	17.81 Deg.C
1735217206	16.23 Volts	18.78 Deg.C
1735217116	13.62 Volts	18.78 Deg.C
1735217093	14.71 Volts	18.29 Deg.C
1735217068	16.32 Volts	17.81 Deg.C
1735217048	15.41 Volts	17.32 Deg.C
1735216982	12.66 Volts	17.32 Deg.C
1735216801	12.63 Volts	16.83 Deg.C
1735216621	12.66 Volts	17.32 Deg.C
1735216440	12.63 Volts	17.32 Deg.C
1735216345	12.63 Volts	17.32 Deg.C
1735216290	12.63 Volts	17.32 Deg.C
1735216164	12.63 Volts	17.32 Deg.C
1735215984	12.6 Volts	17.32 Deg.C
1735215803	12.6 Volts	17.32 Deg.C
1735215624	12.57 Volts	17.32 Deg.C
1735215443	12.42 Volts	17.32 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)