This is the latest recevied telemetry packets stored in our database for station/object EA5DFV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769850570 | 2.73 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769839240 | 2.79 VDC | 5 VDC | 0 | 0 | 0 |
| 1769833090 | 2.98 VDC | 0 VDC | 0 | 0 | 0 |
| 1769831275 | 3.06 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769830368 | 3.03 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769829460 | 3.03 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769828553 | 3.03 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769827645 | 3.01 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769826738 | 3.03 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769825831 | 3.06 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769824924 | 3.05 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769824016 | 3.04 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769823108 | 3.02 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769822201 | 3 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769821293 | 2.97 VDC | 5 VDC | 0 | 0 | 0 |
| 1769820386 | 2.93 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769819479 | 2.88 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769817664 | 2.69 VDC | 5 VDC | 0 | 0 | 0 |
| 1769814438 | 2.81 VDC | 5 VDC | 0 | 0 | 0 |
| 1769808696 | 2.96 VDC | 0 VDC | 0 | 0 | 0 |
| 1769807788 | 3.14 VDC | 0 VDC | 0 | 0 | 0 |
| 1769806881 | 3.22 VDC | 0 VDC | 0 | 0 | 0 |
| 1769805973 | 3.31 VDC | 0 VDC | 0 | 0 | 0 |
| 1769805066 | 3.37 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1769799400 | 2.68 VDC | 5 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)