This is the latest recevied telemetry packets stored in our database for station/object F4EWI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | HTemp* | BAT* | SAT* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774203056 | 40.51 °C | 6.93 V | 11 | 0 | 0 |
| 1774203034 | 40.11 °C | 6.65 V | 11 | 0 | 0 |
| 1774203024 | 40.07 °C | 6.94 V | 11 | 0 | 0 |
| 1774203010 | 40.11 °C | 6.94 V | 11 | 0 | 0 |
| 1774202976 | 40.51 °C | 6.94 V | 11 | 0 | 0 |
| 1774202943 | 41.28 °C | 6.94 V | 11 | 0 | 0 |
| 1774202926 | 41.32 °C | 6.96 V | 11 | 0 | 0 |
| 1774202900 | 41.32 °C | 6.94 V | 10 | 0 | 0 |
| 1774202891 | 41.32 °C | 6.95 V | 11 | 0 | 0 |
| 1774202841 | 41.39 °C | 6.95 V | 11 | 0 | 0 |
| 1774202629 | 43.44 °C | 6.96 V | 12 | 0 | 0 |
| 1774202596 | 43.87 °C | 6.96 V | 13 | 0 | 0 |
| 1774202586 | 43.62 °C | 6.97 V | 12 | 0 | 0 |
| 1774202576 | 43.62 °C | 6.96 V | 13 | 0 | 0 |
| 1774202558 | 43.41 °C | 6.96 V | 12 | 0 | 0 |
| 1774202550 | 43.09 °C | 6.69 V | 11 | 0 | 0 |
| 1774202541 | 43.19 °C | 6.98 V | 11 | 0 | 0 |
| 1774202526 | 42.81 °C | 6.96 V | 12 | 0 | 0 |
| 1774202518 | 42.7 °C | 6.96 V | 12 | 0 | 0 |
| 1774202509 | 42.95 °C | 6.98 V | 12 | 0 | 0 |
| 1774202481 | 42.98 °C | 6.69 V | 11 | 0 | 0 |
| 1774202472 | 42.77 °C | 6.98 V | 10 | 0 | 0 |
| 1774202458 | 42.77 °C | 6.99 V | 11 | 0 | 0 |
| 1774202444 | 42.49 °C | 6.99 V | 10 | 0 | 0 |
| 1774202434 | 42.18 °C | 6.99 V | 10 | 0 | 0 |
*Used Equation Coefficients:
HTemp: 0, 0.01, 0
BAT: 0, 0.01, 0
SAT: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)