This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764946194 | 12.99 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1764944404 | 12.96 Volts | 45.68 Deg.F | 0 | 0 | 0 |
| 1764942612 | 12.96 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764940823 | 12.96 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764937242 | 12.93 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764935450 | 12.96 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764933661 | 12.96 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764931869 | 12.96 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1764930078 | 12.96 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764928287 | 12.96 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764919332 | 12.99 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764917540 | 12.96 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764912169 | 12.99 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764910377 | 12.99 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764906796 | 12.99 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764903214 | 12.99 Volts | 45.68 Deg.F | 0 | 0 | 0 |
| 1764896049 | 12.99 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764890678 | 13.02 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764887096 | 13.02 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1764879933 | 13.05 Volts | 43.92 Deg.F | 0 | 0 | 0 |
| 1764876353 | 13.05 Volts | 43.04 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0.48
Temp: 0, 0.88, -470
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)