This is the latest recevied telemetry packets stored in our database for station/object SP2ATJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769789490 | 4.22 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789472 | 4.74 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789427 | 4.42 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789414 | 4.49 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789401 | 4.59 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789389 | 4.35 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789375 | 4.36 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789355 | 4.32 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789342 | 4.32 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789305 | 4.33 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789283 | 4.34 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789269 | 4.3 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789156 | 4.46 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789143 | 4.52 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789104 | 3.98 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789090 | 3.98 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789071 | 3.97 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769789050 | 3.96 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769788928 | 4.05 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769788884 | 4.04 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769788840 | 4.24 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769788795 | 4.26 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769788783 | 4.22 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769788771 | 4.24 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1769788713 | 4.68 VDC | 0.08 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)