This is the latest recevied telemetry packets stored in our database for station/object VA3SM-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735151263 | 400 | 558 | 0 | 0 | 0 |
| 1735149471 | 400 | 557 | 0 | 0 | 0 |
| 1735129765 | 401 | 549 | 0 | 0 | 0 |
| 1735127974 | 402 | 550 | 0 | 0 | 0 |
| 1735113643 | 403 | 552 | 0 | 0 | 0 |
| 1735111852 | 403 | 552 | 0 | 0 | 0 |
| 1735110060 | 404 | 552 | 0 | 0 | 0 |
| 1735106478 | 404 | 553 | 0 | 0 | 0 |
| 1735101102 | 405 | 551 | 0 | 0 | 0 |
| 1735099310 | 405 | 551 | 0 | 0 | 0 |
| 1735097520 | 405 | 550 | 0 | 0 | 0 |
| 1735095727 | 406 | 552 | 0 | 0 | 0 |
| 1735092144 | 407 | 554 | 0 | 0 | 0 |
| 1735084977 | 409 | 560 | 0 | 0 | 0 |
| 1735083185 | 409 | 561 | 0 | 0 | 0 |
| 1735081393 | 409 | 564 | 0 | 0 | 0 |
| 1735079600 | 410 | 566 | 0 | 0 | 0 |
| 1735074223 | 412 | 574 | 0 | 0 | 0 |
| 1735072431 | 413 | 577 | 0 | 0 | 0 |
| 1735070638 | 414 | 580 | 0 | 0 | 0 |
| 1735068243 | 458 | 591 | 0 | 0 | 0 |
| 1735068124 | 458 | 591 | 0 | 0 | 0 |
| 1735067923 | 459 | 591 | 0 | 0 | 0 |
| 1735067832 | 459 | 591 | 0 | 0 | 0 |
| 1735067661 | 436 | 591 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)