This is the latest recevied telemetry packets stored in our database for station/object KJ7EBU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769789540 | 12.36 Volts | 58.94 Deg.F | 0 | 0 | 0 |
| 1769789421 | 12.34 Volts | 58.06 Deg.F | 0 | 0 | 0 |
| 1769789302 | 12.31 Volts | 58.06 Deg.F | 0 | 0 | 0 |
| 1769788706 | 12.19 Volts | 57.18 Deg.F | 0 | 0 | 0 |
| 1769788587 | 12.16 Volts | 57.18 Deg.F | 0 | 0 | 0 |
| 1769788467 | 12.1 Volts | 58.06 Deg.F | 0 | 0 | 0 |
| 1769787514 | 11.93 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769786918 | 11.81 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769786680 | 11.78 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769786084 | 11.72 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769785845 | 11.69 Volts | 54.55 Deg.F | 0 | 0 | 0 |
| 1769785726 | 11.66 Volts | 54.55 Deg.F | 0 | 0 | 0 |
| 1769785488 | 11.66 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769785249 | 11.66 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769785130 | 11.66 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769784773 | 11.66 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769784534 | 11.66 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769784415 | 11.66 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769784295 | 11.66 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769783819 | 11.72 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769783461 | 11.75 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769783342 | 11.78 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769783222 | 11.78 Volts | 55.42 Deg.F | 0 | 0 | 0 |
| 1769783103 | 11.78 Volts | 56.3 Deg.F | 0 | 0 | 0 |
| 1769782865 | 11.84 Volts | 56.3 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)