This is the latest recevied telemetry packets stored in our database for station/object VK2CPR-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790308626 | 819 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1790307420 | 817 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1790306213 | 815 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1790305006 | 813 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1790303841 | 811 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1790302635 | 809 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1790301428 | 807 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1790300221 | 805 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1790299014 | 803 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1790297808 | 801 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1790296641 | 799 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1790295434 | 797 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1790294227 | 795 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1790293021 | 793 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1790291814 | 791 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1790290607 | 789 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1790289438 | 787 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1790288231 | 785 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1790287025 | 783 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1790285818 | 781 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1790284611 | 779 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1790283405 | 777 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1790282238 | 775 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1790281032 | 773 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1790279825 | 771 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)