This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735102233 | 140 | 76 | 18 | 0 | 0 |
| 1735098633 | 139 | 77 | 19 | 0 | 0 |
| 1735095033 | 140 | 73 | 20 | 0 | 0 |
| 1735091432 | 139 | 70 | 21 | 0 | 0 |
| 1735087832 | 138 | 67 | 26 | 0 | 0 |
| 1735084233 | 139 | 65 | 28 | 0 | 0 |
| 1735080632 | 137 | 59 | 24 | 0 | 0 |
| 1735077032 | 131 | 55 | 22 | 0 | 0 |
| 1735073432 | 131 | 52 | 23 | 0 | 0 |
| 1735069832 | 124 | 49 | 19 | 0 | 0 |
| 1735066233 | 122 | 49 | 19 | 0 | 0 |
| 1735062633 | 123 | 50 | 21 | 0 | 0 |
| 1735059032 | 123 | 50 | 18 | 0 | 0 |
| 1735055432 | 123 | 50 | 19 | 0 | 0 |
| 1735051832 | 124 | 51 | 21 | 0 | 0 |
| 1735048232 | 124 | 52 | 17 | 0 | 0 |
| 1735044633 | 124 | 52 | 20 | 0 | 0 |
| 1735041033 | 124 | 54 | 35 | 0 | 0 |
| 1735037433 | 125 | 55 | 44 | 0 | 0 |
| 1735033833 | 126 | 58 | 38 | 0 | 0 |
| 1735030233 | 127 | 63 | 18 | 0 | 0 |
| 1735026632 | 128 | 68 | 21 | 0 | 0 |
| 1735023032 | 129 | 69 | 20 | 0 | 0 |
| 1735019433 | 140 | 70 | 21 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)