This is the latest recevied telemetry packets stored in our database for station/object W4DOD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790267167 | 12.42 | 39.32 | 0 | 0 | 0 |
| 1790267047 | 12.39 | 38.83 | 0 | 0 | 0 |
| 1790266808 | 12.25 | 38.83 | 0 | 0 | 0 |
| 1790266684 | 12.28 | 38.34 | 0 | 0 | 0 |
| 1790266445 | 12.36 | 38.34 | 0 | 0 | 0 |
| 1790266325 | 12.36 | 38.34 | 0 | 0 | 0 |
| 1790266205 | 13.16 | 38.34 | 0 | 0 | 0 |
| 1790266086 | 12.95 | 38.34 | 0 | 0 | 0 |
| 1790265966 | 12.69 | 38.34 | 0 | 0 | 0 |
| 1790260119 | 12.45 | 34.92 | 0 | 0 | 0 |
| 1790259521 | 12.04 | 30.52 | 0 | 0 | 0 |
| 1790255822 | 12.04 | 35.9 | 0 | 0 | 0 |
| 1790255104 | 14.39 | 33.94 | 0 | 0 | 0 |
| 1790254985 | 13.1 | 32.96 | 0 | 0 | 0 |
| 1790252153 | 13.01 | 34.43 | 0 | 0 | 0 |
| 1790251795 | 13.57 | 31.01 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)