This is the latest recevied telemetry packets stored in our database for station/object N7JVN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764991077 | 13.13 Volts | 70.97 Deg.F | 0 | 0 | 0 |
| 1764987480 | 13.13 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1764982089 | 13.13 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1764980292 | 13.13 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1764978495 | 13.13 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1764976698 | 14.15 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1764974901 | 13.13 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1764973104 | 13.1 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1764971307 | 13.13 Volts | 72.73 Deg.F | 0 | 0 | 0 |
| 1764969510 | 13.13 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1764967713 | 13.13 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1764964119 | 13.13 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1764962322 | 13.13 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1764960525 | 13.1 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1764958728 | 13.13 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1764951542 | 13.1 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1764949746 | 13.13 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1764947950 | 13.13 Volts | 63.05 Deg.F | 0 | 0 | 0 |
| 1764942560 | 13.1 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1764940763 | 13.13 Volts | 64.81 Deg.F | 0 | 0 | 0 |
| 1764938967 | 13.13 Volts | 64.81 Deg.F | 0 | 0 | 0 |
| 1764935373 | 13.1 Volts | 65.69 Deg.F | 0 | 0 | 0 |
| 1764929984 | 13.13 Volts | 66.57 Deg.F | 0 | 0 | 0 |
| 1764924595 | 13.13 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1764922799 | 13.1 Volts | 67.45 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)