This is the latest recevied telemetry packets stored in our database for station/object OK1CNN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769778581 | 417 | 577 | 0 | 0 | 0 |
| 1769776789 | 417 | 577 | 0 | 0 | 0 |
| 1769773207 | 418 | 577 | 0 | 0 | 0 |
| 1769771414 | 418 | 577 | 0 | 0 | 0 |
| 1769769623 | 420 | 578 | 0 | 0 | 0 |
| 1769767832 | 420 | 577 | 0 | 0 | 0 |
| 1769766041 | 421 | 578 | 0 | 0 | 0 |
| 1769764250 | 421 | 578 | 0 | 0 | 0 |
| 1769762458 | 422 | 579 | 0 | 0 | 0 |
| 1769758875 | 424 | 581 | 0 | 0 | 0 |
| 1769757046 | 459 | 584 | 0 | 0 | 0 |
| 1769757037 | 459 | 583 | 0 | 0 | 0 |
| 1769756992 | 462 | 583 | 0 | 0 | 0 |
| 1769756868 | 465 | 582 | 0 | 0 | 0 |
| 1769756814 | 462 | 581 | 0 | 0 | 0 |
| 1769756465 | 461 | 581 | 0 | 0 | 0 |
| 1769756282 | 462 | 581 | 0 | 0 | 0 |
| 1769756041 | 463 | 580 | 0 | 0 | 0 |
| 1769756031 | 464 | 580 | 0 | 0 | 0 |
| 1769756025 | 467 | 580 | 0 | 0 | 0 |
| 1769755873 | 465 | 580 | 0 | 0 | 0 |
| 1769755854 | 465 | 580 | 0 | 0 | 0 |
| 1769755753 | 468 | 580 | 0 | 0 | 0 |
| 1769755640 | 468 | 579 | 0 | 0 | 0 |
| 1769755588 | 468 | 579 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)