This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794332974 | 44 Count | 510 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794331173 | 40 Count | 407 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794329372 | 36 Count | 304 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794327571 | 27 Count | 204 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794325770 | 23 Count | 157 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794323969 | 15 Count | 116 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794322168 | 11 Count | 64 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794320368 | 3 Count | 27 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794318567 | 124 Count | 1021 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794316766 | 115 Count | 988 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794313165 | 105 Count | 910 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794311364 | 101 Count | 876 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794309563 | 95 Count | 803 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794307762 | 91 Count | 760 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794305962 | 85 Count | 719 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794304161 | 81 Count | 663 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794302360 | 75 Count | 625 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794300560 | 71 Count | 584 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794296975 | 56 Count | 514 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794295174 | 49 Count | 428 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794293374 | 45 Count | 370 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794291573 | 35 Count | 303 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794289772 | 31 Count | 246 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794287972 | 19 Count | 184 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794286171 | 15 Count | 127 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)