This is the latest recevied telemetry packets stored in our database for station/object VA3RHH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794362222 | 447 | 601 | 0 | 0 | 0 |
| 1794360430 | 447 | 601 | 0 | 0 | 0 |
| 1794358639 | 447 | 601 | 0 | 0 | 0 |
| 1794356846 | 447 | 603 | 0 | 0 | 0 |
| 1794355055 | 447 | 601 | 0 | 0 | 0 |
| 1794353262 | 447 | 601 | 0 | 0 | 0 |
| 1794346093 | 447 | 601 | 0 | 0 | 0 |
| 1794338924 | 447 | 600 | 0 | 0 | 0 |
| 1794337132 | 447 | 600 | 0 | 0 | 0 |
| 1794333547 | 447 | 599 | 0 | 0 | 0 |
| 1794329603 | 447 | 599 | 0 | 0 | 0 |
| 1794326019 | 447 | 598 | 0 | 0 | 0 |
| 1794324227 | 447 | 598 | 0 | 0 | 0 |
| 1794313472 | 447 | 598 | 0 | 0 | 0 |
| 1794309888 | 447 | 598 | 0 | 0 | 0 |
| 1794308095 | 447 | 598 | 0 | 0 | 0 |
| 1794304511 | 447 | 597 | 0 | 0 | 0 |
| 1794304491 | 447 | 598 | 0 | 0 | 0 |
| 1794302838 | 447 | 598 | 0 | 0 | 0 |
| 1794302039 | 447 | 598 | 0 | 0 | 0 |
| 1794300248 | 447 | 598 | 0 | 0 | 0 |
| 1794298659 | 447 | 597 | 0 | 0 | 0 |
| 1794296869 | 447 | 598 | 0 | 0 | 0 |
| 1794295076 | 447 | 598 | 0 | 0 | 0 |
| 1794291494 | 447 | 598 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)