This is the latest recevied telemetry packets stored in our database for station/object EA3EZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUMITAT* | PRESS* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764949214 | 13 | 42 | 1011 | 0 | 0 |
| 1764948615 | 13 | 42 | 1011 | 0 | 0 |
| 1764948013 | 13 | 41 | 1011 | 0 | 0 |
| 1764947413 | 13 | 41 | 1011 | 0 | 0 |
| 1764946813 | 13 | 43 | 1011 | 0 | 0 |
| 1764946213 | 13 | 43 | 1011 | 0 | 0 |
| 1764945613 | 13 | 43 | 1010 | 0 | 0 |
| 1764945013 | 13 | 43 | 1010 | 0 | 0 |
| 1764944413 | 13 | 44 | 1010 | 0 | 0 |
| 1764943813 | 13 | 40 | 1010 | 0 | 0 |
| 1764943213 | 13 | 40 | 1010 | 0 | 0 |
| 1764942613 | 13 | 39 | 1010 | 0 | 0 |
| 1764942013 | 13 | 39 | 1010 | 0 | 0 |
| 1764941413 | 13 | 37 | 1010 | 0 | 0 |
| 1764940813 | 13 | 37 | 1010 | 0 | 0 |
| 1764940213 | 13 | 37 | 1010 | 0 | 0 |
| 1764939613 | 13 | 36 | 1010 | 0 | 0 |
| 1764939013 | 13 | 36 | 1010 | 0 | 0 |
| 1764938413 | 13 | 36 | 1010 | 0 | 0 |
| 1764937813 | 13 | 37 | 1010 | 0 | 0 |
| 1764937213 | 13 | 37 | 1010 | 0 | 0 |
| 1764936613 | 13 | 37 | 1010 | 0 | 0 |
| 1764936013 | 13 | 37 | 1010 | 0 | 0 |
| 1764935445 | 13 | 37 | 1010 | 0 | 0 |
| 1764934813 | 13 | 38 | 1010 | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 1, 0
HUMITAT: 0, 1, 0
PRESS: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)