This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786402922 | 13.36 Volts | 97.37 Deg.F | 0 | 0 | 0 |
| 1786401126 | 13.71 Volts | 95.61 Deg.F | 0 | 0 | 0 |
| 1786399333 | 13.74 Volts | 93.85 Deg.F | 0 | 0 | 0 |
| 1786397537 | 13.71 Volts | 92.09 Deg.F | 0 | 0 | 0 |
| 1786395742 | 13.6 Volts | 89.45 Deg.F | 0 | 0 | 0 |
| 1786393949 | 13.3 Volts | 88.57 Deg.F | 0 | 0 | 0 |
| 1786392156 | 13.27 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1786390293 | 13.27 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1786388502 | 13.21 Volts | 84.17 Deg.F | 0 | 0 | 0 |
| 1786383123 | 13.01 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1786381333 | 12.89 Volts | 70.97 Deg.F | 0 | 0 | 0 |
| 1786379541 | 12.86 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1786377747 | 12.8 Volts | 70.97 Deg.F | 0 | 0 | 0 |
| 1786372372 | 12.8 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1786370579 | 12.77 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1786366996 | 12.77 Volts | 70.97 Deg.F | 0 | 0 | 0 |
| 1786365202 | 12.77 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1786361617 | 12.77 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1786359824 | 12.77 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1786356239 | 12.8 Volts | 70.97 Deg.F | 0 | 0 | 0 |
| 1786354446 | 12.77 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1786349068 | 12.8 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1786347276 | 12.8 Volts | 72.73 Deg.F | 0 | 0 | 0 |
| 1786345483 | 12.77 Volts | 72.73 Deg.F | 0 | 0 | 0 |
| 1786340105 | 12.8 Volts | 75.37 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)