This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794331948 | 44 Count | 753 Count | 29 Count | 4.27 VDC | 0 VDC |
| 1794330147 | 41 Count | 652 Count | 27 Count | 4.27 VDC | 0 VDC |
| 1794328348 | 38 Count | 556 Count | 25 Count | 4.27 VDC | 0 VDC |
| 1794326548 | 33 Count | 489 Count | 21 Count | 4.27 VDC | 0 VDC |
| 1794324750 | 30 Count | 427 Count | 19 Count | 4.27 VDC | 0 VDC |
| 1794322950 | 26 Count | 356 Count | 16 Count | 4.27 VDC | 2.24 VDC |
| 1794321150 | 23 Count | 311 Count | 14 Count | 4.27 VDC | 4.48 VDC |
| 1794321139 | 18 Count | 311 Count | 14 Count | 4.27 VDC | 4.48 VDC |
| 1794319340 | 14 Count | 256 Count | 11 Count | 4.28 VDC | 4.48 VDC |
| 1794317541 | 10 Count | 207 Count | 8 Count | 4.28 VDC | 4.48 VDC |
| 1794315742 | 6 Count | 135 Count | 5 Count | 4.28 VDC | 4.48 VDC |
| 1794313942 | 3 Count | 76 Count | 3 Count | 4.29 VDC | 4.44 VDC |
| 1794312142 | 62 Count | 1019 Count | 49 Count | 4.3 VDC | 4.64 VDC |
| 1794310342 | 59 Count | 960 Count | 47 Count | 4.29 VDC | 4.64 VDC |
| 1794308542 | 54 Count | 845 Count | 43 Count | 4.29 VDC | 4.64 VDC |
| 1794306744 | 51 Count | 783 Count | 41 Count | 4.28 VDC | 4.44 VDC |
| 1794304943 | 47 Count | 717 Count | 38 Count | 4.28 VDC | 4.46 VDC |
| 1794303144 | 44 Count | 643 Count | 36 Count | 4.27 VDC | 4.46 VDC |
| 1794301345 | 40 Count | 590 Count | 33 Count | 4.27 VDC | 4.46 VDC |
| 1794299545 | 36 Count | 534 Count | 30 Count | 4.27 VDC | 4.46 VDC |
| 1794297746 | 31 Count | 466 Count | 26 Count | 4.27 VDC | 4.46 VDC |
| 1794295946 | 24 Count | 387 Count | 20 Count | 4.27 VDC | 4.46 VDC |
| 1794294147 | 19 Count | 303 Count | 16 Count | 4.27 VDC | 4.46 VDC |
| 1794292348 | 15 Count | 240 Count | 13 Count | 4.26 VDC | 4.46 VDC |
| 1794290548 | 9 Count | 154 Count | 8 Count | 4.26 VDC | 1.32 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)