This is the latest recevied telemetry packets stored in our database for station/object VA6COM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735246937 | 444 | 614 | 0 | 0 | 0 |
| 1735246917 | 417 | 614 | 0 | 0 | 0 |
| 1735246640 | 421 | 608 | 0 | 0 | 0 |
| 1735246620 | 419 | 609 | 0 | 0 | 0 |
| 1735246481 | 422 | 604 | 0 | 0 | 0 |
| 1735246145 | 427 | 594 | 0 | 0 | 0 |
| 1735245072 | 482 | 613 | 0 | 0 | 0 |
| 1735245052 | 450 | 613 | 0 | 0 | 0 |
| 1735245012 | 397 | 613 | 0 | 0 | 0 |
| 1735244993 | 399 | 613 | 0 | 0 | 0 |
| 1735244973 | 404 | 613 | 0 | 0 | 0 |
| 1735244913 | 428 | 613 | 0 | 0 | 0 |
| 1735244854 | 474 | 611 | 0 | 0 | 0 |
| 1735244834 | 407 | 611 | 0 | 0 | 0 |
| 1735244814 | 435 | 610 | 0 | 0 | 0 |
| 1735244775 | 478 | 609 | 0 | 0 | 0 |
| 1735244755 | 400 | 608 | 0 | 0 | 0 |
| 1735244735 | 405 | 608 | 0 | 0 | 0 |
| 1735244695 | 484 | 607 | 0 | 0 | 0 |
| 1735244576 | 420 | 603 | 0 | 0 | 0 |
| 1735244537 | 421 | 603 | 0 | 0 | 0 |
| 1735244497 | 415 | 602 | 0 | 0 | 0 |
| 1735244477 | 418 | 601 | 0 | 0 | 0 |
| 1735244121 | 429 | 589 | 0 | 0 | 0 |
| 1735244101 | 498 | 588 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)