This is the latest recevied telemetry packets stored in our database for station/object SQ9SIM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769811538 | 110 Count | 479 Count | 5 Count | 0 VDC | 0 VDC |
| 1769807954 | 108 Count | 479 Count | 5 Count | 0 VDC | 0 VDC |
| 1769804352 | 106 Count | 479 Count | 5 Count | 0 VDC | 0 VDC |
| 1769800751 | 103 Count | 478 Count | 4 Count | 0 VDC | 0 VDC |
| 1769797149 | 101 Count | 478 Count | 4 Count | 0 VDC | 0 VDC |
| 1769793548 | 99 Count | 478 Count | 4 Count | 0 VDC | 0 VDC |
| 1769789946 | 97 Count | 478 Count | 4 Count | 0 VDC | 0 VDC |
| 1769786344 | 95 Count | 475 Count | 4 Count | 0 VDC | 0 VDC |
| 1769782743 | 93 Count | 473 Count | 4 Count | 0 VDC | 0 VDC |
| 1769779142 | 91 Count | 472 Count | 4 Count | 0 VDC | 0 VDC |
| 1769775540 | 89 Count | 463 Count | 4 Count | 0 VDC | 0 VDC |
| 1769771938 | 87 Count | 462 Count | 4 Count | 0 VDC | 0 VDC |
| 1769768337 | 85 Count | 462 Count | 4 Count | 0 VDC | 0 VDC |
| 1769764753 | 83 Count | 462 Count | 4 Count | 0 VDC | 0 VDC |
| 1769761152 | 81 Count | 461 Count | 4 Count | 0 VDC | 0 VDC |
| 1769757550 | 79 Count | 460 Count | 4 Count | 0 VDC | 0 VDC |
| 1769753949 | 77 Count | 423 Count | 4 Count | 0 VDC | 0 VDC |
| 1769750347 | 75 Count | 419 Count | 4 Count | 0 VDC | 0 VDC |
| 1769746746 | 73 Count | 419 Count | 4 Count | 0 VDC | 0 VDC |
| 1769743144 | 71 Count | 419 Count | 4 Count | 0 VDC | 0 VDC |
| 1769739543 | 69 Count | 419 Count | 4 Count | 0 VDC | 0 VDC |
| 1769735941 | 67 Count | 419 Count | 4 Count | 0 VDC | 0 VDC |
| 1769732340 | 65 Count | 419 Count | 4 Count | 0 VDC | 0 VDC |
| 1769728738 | 63 Count | 419 Count | 4 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)