This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764961913 | 11.96 VDC | 0 | 0 | 0 | 0 |
| 1764961006 | 12.06 VDC | 0 | 0 | 0 | 0 |
| 1764960099 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1764959192 | 12.14 VDC | 0 | 0 | 0 | 0 |
| 1764958285 | 12.26 VDC | 0 | 0 | 0 | 0 |
| 1764957378 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1764956471 | 12.4 VDC | 0 | 0 | 0 | 0 |
| 1764955564 | 12.34 VDC | 0 | 0 | 0 | 0 |
| 1764954657 | 12.44 VDC | 0 | 0 | 0 | 0 |
| 1764953750 | 12.52 VDC | 0 | 0 | 0 | 0 |
| 1764952843 | 12.56 VDC | 0 | 0 | 0 | 0 |
| 1764951936 | 12.66 VDC | 0 | 0 | 0 | 0 |
| 1764951029 | 12.64 VDC | 0 | 0 | 0 | 0 |
| 1764950122 | 12.78 VDC | 0 | 0 | 0 | 0 |
| 1764949215 | 12.86 VDC | 0 | 0 | 0 | 0 |
| 1764948307 | 12.96 VDC | 0 | 0 | 0 | 0 |
| 1764947400 | 12.88 VDC | 0 | 0 | 0 | 0 |
| 1764946492 | 12.9 VDC | 0 | 0 | 0 | 0 |
| 1764945585 | 13.04 VDC | 0 | 0 | 0 | 0 |
| 1764944678 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1764943772 | 13.2 VDC | 0 | 0 | 0 | 0 |
| 1764943031 | 13.02 VDC | 0 | 0 | 0 | 0 |
| 1764942123 | 13.24 VDC | 0 | 0 | 0 | 0 |
| 1764941216 | 13.26 VDC | 0 | 0 | 0 | 0 |
| 1764940309 | 13.34 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)