This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1790326841 | 1367 | 82.6 | 46.2 | 69.1 | 0 |
| 1790326205 | 1361 | 83 | 45.6 | 69.2 | 0 |
| 1790325639 | 1364 | 83.1 | 45.1 | 69.9 | 0 |
| 1790325004 | 1363 | 83.2 | 45.6 | 69.9 | 0 |
| 1790324441 | 1364 | 83.3 | 45.1 | 69.6 | 0 |
| 1790323805 | 1364 | 83.8 | 46.2 | 70 | 0 |
| 1790323241 | 1369 | 84.1 | 46.2 | 70.6 | 0 |
| 1790322605 | 1364 | 84.3 | 46.2 | 70.8 | 0 |
| 1790322041 | 1363 | 84.4 | 46.7 | 71 | 0 |
| 1790321404 | 1364 | 84.6 | 46.2 | 71.2 | 0 |
| 1790320840 | 1364 | 84.8 | 46.2 | 71.3 | 0 |
| 1790320205 | 1366 | 84.8 | 46.7 | 71.4 | 0 |
| 1790319643 | 1366 | 84.9 | 46.7 | 71.4 | 0 |
| 1790319005 | 1363 | 84.9 | 46.7 | 71.5 | 0 |
| 1790318441 | 1363 | 84.9 | 47.2 | 71.3 | 0 |
| 1790317805 | 1364 | 85 | 47.2 | 71.4 | 0 |
| 1790317241 | 1361 | 85.1 | 46.7 | 71.3 | 0 |
| 1790316604 | 1364 | 85.1 | 47.2 | 71.4 | 0 |
| 1790316040 | 1364 | 85.4 | 47.2 | 71.5 | 0 |
| 1790315405 | 1363 | 85.6 | 47.2 | 71.7 | 0 |
| 1790314840 | 1363 | 85.7 | 47.8 | 71.8 | 0 |
| 1790314205 | 1366 | 86.1 | 47.2 | 72.2 | 0 |
| 1790313641 | 1364 | 86.3 | 47.2 | 72.4 | 0 |
| 1790313005 | 1364 | 86.7 | 47.8 | 72.8 | 0 |
| 1790312440 | 1364 | 87 | 48.3 | 73.1 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)