This is the latest recevied telemetry packets stored in our database for station/object DG0MG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Ubat* | TxPwr* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786439549 | 21.9 degC | 4.15 V | 14 dBm | 0 | 0 |
| 1786439247 | 21.3 degC | 4.15 V | 6 dBm | 0 | 0 |
| 1786438945 | 21.3 degC | 4.15 V | 14 dBm | 0 | 0 |
| 1786438643 | 21.6 degC | 4.16 V | 7 dBm | 0 | 0 |
| 1786438341 | 21.3 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786437735 | 21.2 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786437130 | 19.3 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786436223 | 19.6 degC | 4.17 V | 11 dBm | 0 | 0 |
| 1786435921 | 19 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786435619 | 18.5 degC | 4.16 V | 12 dBm | 0 | 0 |
| 1786435317 | 18.2 degC | 4.17 V | 14 dBm | 0 | 0 |
| 1786435012 | 18.4 degC | 4.17 V | 13 dBm | 0 | 0 |
| 1786434710 | 18.2 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786434107 | 18 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786433503 | 17.4 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786433201 | 17.2 degC | 4.15 V | 8 dBm | 0 | 0 |
| 1786432899 | 17 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786432597 | 16.9 degC | 4.16 V | 9 dBm | 0 | 0 |
| 1786432290 | 16.6 degC | 4.17 V | 14 dBm | 0 | 0 |
| 1786431988 | 16.5 degC | 4.16 V | 10 dBm | 0 | 0 |
| 1786431686 | 16.3 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786431385 | 16.1 degC | 4.16 V | 11 dBm | 0 | 0 |
| 1786431082 | 15.9 degC | 4.16 V | 14 dBm | 0 | 0 |
| 1786430780 | 15.8 degC | 4.16 V | 12 dBm | 0 | 0 |
| 1786430479 | 15.5 degC | 4.16 V | 14 dBm | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, -273
Ubat: 0, 0.001, 0
TxPwr: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)