This is the latest recevied telemetry packets stored in our database for station/object DG4CB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735174689 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1735173789 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1735172888 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1735171988 | 4.85 VDC | 0 | 0 | 0 | 0 |
| 1735171088 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1735170187 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1735169287 | 4.91 VDC | 0 | 0 | 0 | 0 |
| 1735168387 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1735167867 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1735166967 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1735166067 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1735165167 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1735164267 | 4.86 VDC | 0 | 0 | 0 | 0 |
| 1735163367 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1735162467 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1735161567 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1735160667 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1735159766 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1735158866 | 4.88 VDC | 0 | 0 | 0 | 0 |
| 1735157966 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1735157066 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1735156166 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1735155266 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1735154366 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1735153466 | 4.6 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)