This is the latest recevied telemetry packets stored in our database for station/object WA9TT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790288187 | 406 | 613 | 0 | 0 | 0 |
| 1790288134 | 408 | 612 | 0 | 0 | 0 |
| 1790288129 | 407 | 613 | 0 | 0 | 0 |
| 1790288044 | 405 | 612 | 0 | 0 | 0 |
| 1790288040 | 406 | 613 | 0 | 0 | 0 |
| 1790287970 | 406 | 613 | 0 | 0 | 0 |
| 1790287887 | 410 | 614 | 0 | 0 | 0 |
| 1790287717 | 406 | 614 | 0 | 0 | 0 |
| 1790287658 | 405 | 614 | 0 | 0 | 0 |
| 1790287598 | 406 | 615 | 0 | 0 | 0 |
| 1790287532 | 409 | 614 | 0 | 0 | 0 |
| 1790287442 | 409 | 615 | 0 | 0 | 0 |
| 1790287383 | 409 | 615 | 0 | 0 | 0 |
| 1790287323 | 412 | 615 | 0 | 0 | 0 |
| 1790287281 | 415 | 615 | 0 | 0 | 0 |
| 1790287221 | 470 | 615 | 0 | 0 | 0 |
| 1790287162 | 469 | 614 | 0 | 0 | 0 |
| 1790287029 | 469 | 613 | 0 | 0 | 0 |
| 1790286933 | 470 | 610 | 0 | 0 | 0 |
| 1790286928 | 469 | 610 | 0 | 0 | 0 |
| 1790263616 | 402 | 607 | 0 | 0 | 0 |
| 1790263601 | 402 | 606 | 0 | 0 | 0 |
| 1790263489 | 403 | 605 | 0 | 0 | 0 |
| 1790263398 | 470 | 605 | 0 | 0 | 0 |
| 1790263330 | 469 | 604 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)