This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794337847 | 275 Count | 436 Count | 208 Count | 3.99 VDC | 0 VDC |
| 1794337247 | 267 Count | 424 Count | 202 Count | 3.99 VDC | 0 VDC |
| 1794336646 | 257 Count | 412 Count | 195 Count | 3.99 VDC | 0 VDC |
| 1794336045 | 249 Count | 400 Count | 189 Count | 3.99 VDC | 0 VDC |
| 1794335445 | 233 Count | 377 Count | 176 Count | 3.98 VDC | 0 VDC |
| 1794334844 | 221 Count | 360 Count | 166 Count | 3.98 VDC | 0 VDC |
| 1794334244 | 208 Count | 344 Count | 156 Count | 3.98 VDC | 0 VDC |
| 1794333643 | 200 Count | 332 Count | 150 Count | 3.98 VDC | 0 VDC |
| 1794333043 | 185 Count | 310 Count | 137 Count | 3.98 VDC | 0 VDC |
| 1794332442 | 172 Count | 293 Count | 127 Count | 3.98 VDC | 0 VDC |
| 1794331841 | 163 Count | 279 Count | 120 Count | 3.97 VDC | 0 VDC |
| 1794331240 | 154 Count | 266 Count | 114 Count | 3.96 VDC | 0 VDC |
| 1794330639 | 143 Count | 248 Count | 105 Count | 3.94 VDC | 0 VDC |
| 1794330039 | 133 Count | 232 Count | 98 Count | 3.92 VDC | 0 VDC |
| 1794329438 | 125 Count | 220 Count | 92 Count | 3.91 VDC | 0 VDC |
| 1794328837 | 116 Count | 202 Count | 85 Count | 3.89 VDC | 0 VDC |
| 1794328237 | 105 Count | 188 Count | 77 Count | 3.87 VDC | 0 VDC |
| 1794327636 | 98 Count | 176 Count | 72 Count | 3.85 VDC | 0 VDC |
| 1794327036 | 86 Count | 157 Count | 63 Count | 3.83 VDC | 0 VDC |
| 1794326435 | 78 Count | 143 Count | 57 Count | 3.8 VDC | 0 VDC |
| 1794325834 | 69 Count | 131 Count | 51 Count | 3.78 VDC | 0 VDC |
| 1794325234 | 61 Count | 119 Count | 45 Count | 3.75 VDC | 0 VDC |
| 1794324633 | 52 Count | 106 Count | 38 Count | 3.74 VDC | 0 VDC |
| 1794324033 | 44 Count | 92 Count | 33 Count | 3.72 VDC | 0 VDC |
| 1794323432 | 35 Count | 72 Count | 26 Count | 3.7 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)