This is the latest recevied telemetry packets stored in our database for station/object AA1Z-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735087654 | 7 | 1354 F | 423 V | 53 M | 0 |
| 1735086851 | 9 | 1352 F | 424 V | 50 M | 0 |
| 1735086691 | 9 | 1354 F | 423 V | 50 M | 0 |
| 1735086531 | 7 | 1354 F | 423 V | 53 M | 0 |
| 1735086371 | 9 | 1352 F | 424 V | 52 M | 0 |
| 1735086211 | 8 | 1352 F | 423 V | 52 M | 0 |
| 1735085731 | 9 | 1354 F | 423 V | 51 M | 0 |
| 1735085411 | 10 | 1354 F | 424 V | 51 M | 0 |
| 1735085091 | 9 | 1356 F | 423 V | 51 M | 0 |
| 1735084931 | 9 | 1356 F | 423 V | 52 M | 0 |
| 1735084771 | 9 | 1356 F | 423 V | 52 M | 0 |
| 1735084611 | 9 | 1358 F | 424 V | 53 M | 0 |
| 1735084451 | 9 | 1358 F | 423 V | 52 M | 0 |
| 1735084291 | 10 | 1360 F | 423 V | 52 M | 0 |
| 1735083651 | 10 | 1360 F | 423 V | 51 M | 0 |
| 1735083331 | 10 | 1360 F | 423 V | 51 M | 0 |
| 1735083171 | 10 | 1358 F | 423 V | 52 M | 0 |
| 1735082851 | 9 | 1352 F | 423 V | 52 M | 0 |
| 1735082691 | 9 | 1356 F | 423 V | 52 M | 0 |
| 1735082531 | 9 | 1356 F | 423 V | 51 M | 0 |
| 1735082371 | 9 | 1358 F | 423 V | 51 M | 0 |
| 1735082211 | 8 | 1360 F | 423 V | 51 M | 0 |
| 1735081891 | 8 | 1358 F | 423 V | 52 M | 0 |
| 1735081731 | 9 | 1354 F | 423 V | 51 M | 0 |
| 1735081571 | 8 | 1356 F | 422 V | 52 M | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)