This is the latest recevied telemetry packets stored in our database for station/object EA5HIR-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790288691 | 4.08 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790287791 | 4.09 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790286892 | 4.08 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790285991 | 3.91 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790285091 | 4.01 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790284190 | 3.96 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790283292 | 3.99 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790282395 | 4.08 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790281493 | 4.04 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790280591 | 4.11 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790279691 | 3.95 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790278793 | 4.1 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790277894 | 3.92 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790276991 | 3.9 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790276091 | 4.05 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790275192 | 4.07 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790274291 | 3.97 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790273393 | 4.07 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790272492 | 3.98 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790271599 | 4.04 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790270691 | 4.12 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790269791 | 4.06 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790268893 | 3.98 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790267991 | 4.12 V | 0 mA | 0 C | 0 % | 0 hPa |
| 1790267092 | 3.91 V | 0 mA | 0 C | 0 % | 0 hPa |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)