This is the latest recevied telemetry packets stored in our database for station/object XE2VP-33. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790160370 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790159768 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790159167 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790158566 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790157966 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790157365 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790156764 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790156165 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790155564 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790154963 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790154362 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790153762 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790153162 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790152561 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790151961 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790151360 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790150760 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790150159 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790149559 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790148958 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790148358 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790147758 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790147158 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790146556 | 0.28 VDC | 0 | 0 | 0 | 0 |
| 1790145955 | 0.28 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)