PenangAPRS Track

My position About ☰

reset

PINAL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PINAL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	V_Ext*	RX_rate*	RelRate*	DrpRate*
1794353541	4.27 VDC	13.5 VDC	480 pkt/h	84 pkt/h	396 pkt/h
1794352941	4.27 VDC	13.5 VDC	282 pkt/h	72 pkt/h	210 pkt/h
1794352341	4.27 VDC	13.48 VDC	546 pkt/h	102 pkt/h	444 pkt/h
1794351740	4.27 VDC	13.5 VDC	486 pkt/h	114 pkt/h	372 pkt/h
1794351140	4.27 VDC	13.5 VDC	486 pkt/h	96 pkt/h	390 pkt/h
1794350540	4.27 VDC	13.5 VDC	948 pkt/h	186 pkt/h	762 pkt/h
1794349940	4.27 VDC	13.54 VDC	420 pkt/h	84 pkt/h	336 pkt/h
1794349340	4.27 VDC	13.52 VDC	324 pkt/h	72 pkt/h	252 pkt/h
1794348739	4.27 VDC	13.52 VDC	396 pkt/h	90 pkt/h	306 pkt/h
1794348139	4.27 VDC	13.52 VDC	486 pkt/h	102 pkt/h	384 pkt/h
1794347538	4.27 VDC	13.56 VDC	300 pkt/h	66 pkt/h	234 pkt/h
1794346938	4.27 VDC	13.54 VDC	444 pkt/h	102 pkt/h	342 pkt/h
1794346338	4.27 VDC	13.54 VDC	408 pkt/h	96 pkt/h	312 pkt/h
1794345738	4.27 VDC	13.54 VDC	318 pkt/h	72 pkt/h	246 pkt/h
1794345138	4.27 VDC	13.54 VDC	426 pkt/h	90 pkt/h	336 pkt/h
1794344538	4.27 VDC	13.52 VDC	432 pkt/h	102 pkt/h	330 pkt/h
1794343937	4.27 VDC	13.52 VDC	282 pkt/h	72 pkt/h	210 pkt/h
1794343337	4.27 VDC	13.52 VDC	438 pkt/h	102 pkt/h	336 pkt/h
1794342737	4.27 VDC	13.52 VDC	444 pkt/h	102 pkt/h	342 pkt/h
1794342136	4.27 VDC	13.52 VDC	276 pkt/h	66 pkt/h	210 pkt/h
1794341536	4.27 VDC	13.54 VDC	738 pkt/h	150 pkt/h	588 pkt/h
1794340936	4.27 VDC	13.56 VDC	1224 pkt/h	264 pkt/h	960 pkt/h
1794340336	4.28 VDC	13.52 VDC	1020 pkt/h	230 pkt/h	790 pkt/h
1794339725	4.26 VDC	13.52 VDC	0 pkt/h	0 pkt/h	0 pkt/h
1794339143	4.27 VDC	13.52 VDC	336 pkt/h	66 pkt/h	270 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

V_Ext: 0, 0.02, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)