This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794342297 | 71 Count | 757 Count | 0 Count | 3.75 VDC | 0 VDC |
| 1794341697 | 70 Count | 754 Count | 0 Count | 3.75 VDC | 0 VDC |
| 1794341095 | 69 Count | 751 Count | 0 Count | 3.63 VDC | 0 VDC |
| 1794340494 | 68 Count | 745 Count | 0 Count | 3.76 VDC | 0 VDC |
| 1794339894 | 67 Count | 736 Count | 0 Count | 3.76 VDC | 0 VDC |
| 1794339293 | 66 Count | 732 Count | 0 Count | 3.76 VDC | 0 VDC |
| 1794338692 | 65 Count | 728 Count | 0 Count | 3.64 VDC | 0 VDC |
| 1794338092 | 64 Count | 723 Count | 0 Count | 3.76 VDC | 0 VDC |
| 1794337491 | 63 Count | 714 Count | 0 Count | 3.76 VDC | 0 VDC |
| 1794336890 | 62 Count | 702 Count | 0 Count | 3.64 VDC | 0 VDC |
| 1794336290 | 61 Count | 692 Count | 0 Count | 3.76 VDC | 0 VDC |
| 1794335689 | 60 Count | 680 Count | 0 Count | 3.72 VDC | 0 VDC |
| 1794335088 | 59 Count | 666 Count | 0 Count | 3.76 VDC | 0 VDC |
| 1794334488 | 58 Count | 652 Count | 0 Count | 3.77 VDC | 0 VDC |
| 1794333887 | 57 Count | 631 Count | 0 Count | 3.77 VDC | 0 VDC |
| 1794333286 | 56 Count | 600 Count | 0 Count | 3.77 VDC | 0 VDC |
| 1794332686 | 55 Count | 588 Count | 0 Count | 3.77 VDC | 0 VDC |
| 1794332085 | 54 Count | 566 Count | 0 Count | 3.77 VDC | 0 VDC |
| 1794331484 | 53 Count | 541 Count | 0 Count | 3.77 VDC | 0 VDC |
| 1794330884 | 52 Count | 530 Count | 0 Count | 3.78 VDC | 0 VDC |
| 1794330283 | 51 Count | 523 Count | 0 Count | 3.78 VDC | 0 VDC |
| 1794329682 | 50 Count | 522 Count | 0 Count | 3.78 VDC | 0 VDC |
| 1794329082 | 49 Count | 514 Count | 0 Count | 3.78 VDC | 0 VDC |
| 1794328481 | 48 Count | 509 Count | 0 Count | 3.78 VDC | 0 VDC |
| 1794327880 | 47 Count | 503 Count | 0 Count | 3.68 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)