This is the latest recevied telemetry packets stored in our database for station/object YB1CHAN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794340154 | 32 °C | 74 %RH | 0 | 0 | 0 |
| 1794338377 | 32 °C | 74 %RH | 0 | 0 | 0 |
| 1794336600 | 32 °C | 74 %RH | 0 | 0 | 0 |
| 1794334823 | 32 °C | 73 %RH | 0 | 0 | 0 |
| 1794333046 | 32 °C | 75 %RH | 0 | 0 | 0 |
| 1794331269 | 32 °C | 74 %RH | 0 | 0 | 0 |
| 1794329492 | 32 °C | 75 %RH | 0 | 0 | 0 |
| 1794327715 | 33 °C | 73 %RH | 0 | 0 | 0 |
| 1794327434 | 33 °C | 72 %RH | 0 | 0 | 0 |
| 1794325657 | 33 °C | 70 %RH | 0 | 0 | 0 |
| 1794323880 | 33 °C | 74 %RH | 0 | 0 | 0 |
| 1794322103 | 33 °C | 75 %RH | 0 | 0 | 0 |
| 1794320326 | 33 °C | 76 %RH | 0 | 0 | 0 |
| 1794318549 | 33 °C | 71 %RH | 0 | 0 | 0 |
| 1794316772 | 33 °C | 72 %RH | 0 | 0 | 0 |
| 1794314995 | 33 °C | 75 %RH | 0 | 0 | 0 |
| 1794313218 | 33 °C | 75 %RH | 0 | 0 | 0 |
| 1794311441 | 33 °C | 74 %RH | 0 | 0 | 0 |
| 1794309665 | 33 °C | 73 %RH | 0 | 0 | 0 |
| 1794307887 | 33 °C | 71 %RH | 0 | 0 | 0 |
| 1794306110 | 34 °C | 70 %RH | 0 | 0 | 0 |
| 1794304333 | 34 °C | 69 %RH | 0 | 0 | 0 |
| 1794302556 | 34 °C | 67 %RH | 0 | 0 | 0 |
| 1794300779 | 35 °C | 68 %RH | 0 | 0 | 0 |
| 1794299002 | 35 °C | 64 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)