PenangAPRS Track

My position About ☰

reset

TSRXAX Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TSRXAX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	RX_rate*	RelRate*	DrpRate*
1790301964	4.35 VDC	258 pkt/h	108 pkt/h	150 pkt/h
1790301364	4.33 VDC	462 pkt/h	150 pkt/h	312 pkt/h
1790300764	4.33 VDC	324 pkt/h	114 pkt/h	210 pkt/h
1790300164	4.34 VDC	480 pkt/h	198 pkt/h	282 pkt/h
1790299563	4.35 VDC	228 pkt/h	108 pkt/h	120 pkt/h
1790298963	4.33 VDC	222 pkt/h	84 pkt/h	138 pkt/h
1790298363	4.33 VDC	174 pkt/h	84 pkt/h	90 pkt/h
1790297763	4.34 VDC	198 pkt/h	78 pkt/h	120 pkt/h
1790297163	4.34 VDC	198 pkt/h	78 pkt/h	120 pkt/h
1790296563	4.34 VDC	228 pkt/h	114 pkt/h	114 pkt/h
1790295963	4.35 VDC	180 pkt/h	78 pkt/h	102 pkt/h
1790295362	4.34 VDC	378 pkt/h	156 pkt/h	222 pkt/h
1790294762	4.35 VDC	420 pkt/h	108 pkt/h	312 pkt/h
1790294162	4.34 VDC	384 pkt/h	174 pkt/h	210 pkt/h
1790293562	4.35 VDC	324 pkt/h	102 pkt/h	222 pkt/h
1790292961	4.34 VDC	240 pkt/h	114 pkt/h	126 pkt/h
1790292361	4.33 VDC	204 pkt/h	90 pkt/h	114 pkt/h
1790291761	4.34 VDC	264 pkt/h	114 pkt/h	150 pkt/h
1790291161	4.33 VDC	192 pkt/h	78 pkt/h	114 pkt/h
1790290561	4.33 VDC	192 pkt/h	72 pkt/h	120 pkt/h
1790289961	4.33 VDC	186 pkt/h	90 pkt/h	96 pkt/h
1790289360	4.34 VDC	210 pkt/h	96 pkt/h	114 pkt/h
1790288760	4.33 VDC	126 pkt/h	60 pkt/h	66 pkt/h
1790288160	4.33 VDC	210 pkt/h	96 pkt/h	114 pkt/h
1790287560	4.33 VDC	210 pkt/h	102 pkt/h	108 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)