This is the latest recevied telemetry packets stored in our database for station/object IU0VBE-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790313755 | 562 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790311952 | 561 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790310149 | 560 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790308346 | 559 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790306542 | 558 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790304739 | 557 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790302936 | 556 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790301133 | 555 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790299330 | 554 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790297565 | 553 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790295761 | 552 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790293958 | 551 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790292155 | 550 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790290352 | 549 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790288549 | 548 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790286745 | 547 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790284942 | 546 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790283139 | 545 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790281336 | 544 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790279533 | 543 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790277730 | 542 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790275964 | 541 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790274161 | 540 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790272358 | 539 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
| 1790270555 | 538 Count | 18 Count | 4 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)