This is the latest recevied telemetry packets stored in our database for station/object DL8GAK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794334155 | 13.3 C | 61.48 % | 1015.5 hPa | 0 | 0 |
| 1794334136 | 12.8 C | 61.33 % | 1015 hPa | 0 | 0 |
| 1794334108 | 12.8 C | 61.33 % | 1016.75 hPa | 0 | 0 |
| 1794334090 | 12.8 C | 61.33 % | 1014 hPa | 0 | 0 |
| 1794334049 | 12.4 C | 61 % | 945.5 hPa | 0 | 0 |
| 1794308207 | 22.2 C | 52.61 % | 1016.25 hPa | 0 | 0 |
| 1794308183 | 22.2 C | 52.61 % | 1015.75 hPa | 0 | 0 |
| 1794308166 | 22.1 C | 53.25 % | 1015.38 hPa | 0 | 0 |
| 1794308150 | 22.1 C | 53.25 % | 1015.75 hPa | 0 | 0 |
| 1794308108 | 22.1 C | 53.25 % | 946.63 hPa | 0 | 0 |
| 1794308058 | 21.5 C | 53.94 % | 1015.5 hPa | 0 | 0 |
| 1794308041 | 21.5 C | 53.94 % | 1016.38 hPa | 0 | 0 |
| 1794308024 | 21.5 C | 53.94 % | 1016.13 hPa | 0 | 0 |
| 1794308001 | 21.3 C | 54.43 % | 1013.25 hPa | 0 | 0 |
| 1794307961 | 21.3 C | 54.43 % | 1016.5 hPa | 0 | 0 |
| 1794307944 | 20.9 C | 55.04 % | 1015.13 hPa | 0 | 0 |
| 1794307927 | 20.9 C | 55.04 % | 1015.13 hPa | 0 | 0 |
| 1794307903 | 20.9 C | 55.04 % | 1016.25 hPa | 0 | 0 |
| 1794307886 | 20.7 C | 55.47 % | 1015.38 hPa | 0 | 0 |
| 1794307869 | 20.7 C | 55.47 % | 1016 hPa | 0 | 0 |
| 1794307806 | 20.3 C | 56.15 % | 1018.75 hPa | 0 | 0 |
| 1794307789 | 20.3 C | 56.15 % | 1018.75 hPa | 0 | 0 |
| 1794307772 | 20 C | 56.64 % | 1020 hPa | 0 | 0 |
| 1794307755 | 20 C | 56.64 % | 1019.63 hPa | 0 | 0 |
| 1794307684 | 19.6 C | 57.15 % | 1015.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)