This is the latest recevied telemetry packets stored in our database for station/object SQ4VW-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786529173 | 296 Count | 354 Count | 225 Count | 4.19 VDC | 0.14 VDC |
| 1786528272 | 291 Count | 347 Count | 221 Count | 4.23 VDC | 0.14 VDC |
| 1786527386 | 282 Count | 341 Count | 217 Count | 4.2 VDC | 0.16 VDC |
| 1786526485 | 277 Count | 334 Count | 213 Count | 4.25 VDC | 0.16 VDC |
| 1786525584 | 272 Count | 328 Count | 209 Count | 4.21 VDC | 0.16 VDC |
| 1786524684 | 267 Count | 321 Count | 205 Count | 4.18 VDC | 0.16 VDC |
| 1786523783 | 262 Count | 315 Count | 201 Count | 4.17 VDC | 0.16 VDC |
| 1786522883 | 256 Count | 307 Count | 196 Count | 4.25 VDC | 0.16 VDC |
| 1786521982 | 251 Count | 301 Count | 192 Count | 4.17 VDC | 0.16 VDC |
| 1786520181 | 243 Count | 290 Count | 186 Count | 4.16 VDC | 0.14 VDC |
| 1786519280 | 238 Count | 283 Count | 182 Count | 4.25 VDC | 0.16 VDC |
| 1786518379 | 233 Count | 277 Count | 178 Count | 4.22 VDC | 0.14 VDC |
| 1786517479 | 228 Count | 270 Count | 174 Count | 4.17 VDC | 0.14 VDC |
| 1786516578 | 222 Count | 263 Count | 169 Count | 4.24 VDC | 0.14 VDC |
| 1786515677 | 217 Count | 256 Count | 165 Count | 4.25 VDC | 0.16 VDC |
| 1786514777 | 212 Count | 250 Count | 161 Count | 4.23 VDC | 0.18 VDC |
| 1786513876 | 194 Count | 230 Count | 144 Count | 4.23 VDC | 0.18 VDC |
| 1786512975 | 188 Count | 223 Count | 139 Count | 4.29 VDC | 0.18 VDC |
| 1786512075 | 182 Count | 215 Count | 134 Count | 4.17 VDC | 0.18 VDC |
| 1786511174 | 176 Count | 208 Count | 129 Count | 4.22 VDC | 0.16 VDC |
| 1786510273 | 170 Count | 200 Count | 124 Count | 4.3 VDC | 0.18 VDC |
| 1786509373 | 164 Count | 193 Count | 119 Count | 4.19 VDC | 0.16 VDC |
| 1786508472 | 158 Count | 185 Count | 114 Count | 4.23 VDC | 0.18 VDC |
| 1786507571 | 152 Count | 178 Count | 109 Count | 4.18 VDC | 0.18 VDC |
| 1786506671 | 146 Count | 170 Count | 104 Count | 4.19 VDC | 0.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)