This is the latest recevied telemetry packets stored in our database for station/object DF8DT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786401696 | 23.2 C | 35.29 % | 1023.88 hPa | 0 | 0 |
| 1786392670 | 26.9 C | 33.2 % | 1021.88 hPa | 0 | 0 |
| 1786383644 | 33 C | 29.24 % | 1019.25 hPa | 0 | 0 |
| 1786374618 | 40.4 C | 21.99 % | 1017.38 hPa | 0 | 0 |
| 1786372573 | 43 C | 18.69 % | 1016.13 hPa | 0 | 0 |
| 1786371390 | 36.4 C | 21.69 % | 1017 hPa | 0 | 0 |
| 1786371012 | 38.4 C | 19.62 % | 1015.38 hPa | 0 | 0 |
| 1786370768 | 39.4 C | 19.81 % | 1017.88 hPa | 0 | 0 |
| 1786370557 | 40.2 C | 21.2 % | 1015.5 hPa | 0 | 0 |
| 1786370304 | 40.3 C | 23.85 % | 1017 hPa | 0 | 0 |
| 1786367003 | 40.9 C | 24.39 % | 1017.5 hPa | 0 | 0 |
| 1786357976 | 47.4 C | 21.84 % | 1016.25 hPa | 0 | 0 |
| 1786348950 | 27.7 C | 39.62 % | 1015.75 hPa | 0 | 0 |
| 1786339924 | 26.5 C | 37.51 % | 1015.25 hPa | 0 | 0 |
| 1786337757 | 27.4 C | 38.98 % | 1012.38 hPa | 0 | 0 |
| 1786337430 | 28.5 C | 35.16 % | 1011.75 hPa | 0 | 0 |
| 1786333692 | 28.7 C | 35.69 % | 1000.75 hPa | 0 | 0 |
| 1786328642 | 29 C | 36.38 % | 1001 hPa | 0 | 0 |
| 1786323443 | 29.4 C | 37.41 % | 1001.38 hPa | 0 | 0 |
| 1786316555 | 30 C | 37.77 % | 1009.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)