This is the latest recevied telemetry packets stored in our database for station/object SQ9LCJ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786527767 | 246 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786525965 | 218 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786524165 | 186 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786522364 | 157 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786520563 | 126 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786518762 | 97 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786515167 | 90 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786514490 | 89 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786512689 | 59 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786510889 | 28 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786509088 | 1014 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786507287 | 984 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786505486 | 956 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786503685 | 924 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786501884 | 895 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786500084 | 864 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786498283 | 836 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786496483 | 805 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786494688 | 778 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786492887 | 747 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786491086 | 717 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786489286 | 686 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786487485 | 658 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786485684 | 627 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1786483883 | 597 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)