PenangAPRS Track

My position About ☰

reset

SP8SZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8SZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1794337914	198 Count	498 Count	191 Count
1794336114	158 Count	408 Count	152 Count
1794334310	129 Count	334 Count	124 Count
1794332510	109 Count	282 Count	105 Count
1794330709	85 Count	224 Count	82 Count
1794328908	63 Count	163 Count	61 Count
1794327108	43 Count	105 Count	42 Count
1794325307	18 Count	45 Count	18 Count
1794323507	434 Count	1011 Count	410 Count
1794321706	407 Count	933 Count	384 Count
1794319913	380 Count	873 Count	362 Count
1794318114	357 Count	816 Count	340 Count
1794316312	332 Count	776 Count	316 Count
1794314511	313 Count	731 Count	298 Count
1794312710	261 Count	647 Count	247 Count
1794310910	238 Count	600 Count	225 Count
1794309109	221 Count	551 Count	209 Count
1794307309	204 Count	507 Count	193 Count
1794305508	183 Count	457 Count	173 Count
1794303707	162 Count	402 Count	153 Count
1794301907	128 Count	326 Count	120 Count
1794298311	74 Count	202 Count	72 Count
1794296511	43 Count	111 Count	42 Count
1794294710	23 Count	56 Count	23 Count
1794292909	434 Count	1017 Count	415 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)