This is the latest recevied telemetry packets stored in our database for station/object WD8ED-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794351387 | 4.25 VDC | 15.5 C | 1011.63 hPa | 0 | 0 |
| 1794350484 | 4.33 VDC | 16 C | 1014.5 hPa | 0 | 0 |
| 1794349581 | 4.27 VDC | 16.4 C | 1016.13 hPa | 0 | 0 |
| 1794348679 | 4.23 VDC | 17.1 C | 1013.88 hPa | 0 | 0 |
| 1794347775 | 4.25 VDC | 18.4 C | 1011.75 hPa | 0 | 0 |
| 1794346873 | 4.21 VDC | 20.1 C | 1013.75 hPa | 0 | 0 |
| 1794345969 | 4.32 VDC | 20.5 C | 1014.25 hPa | 0 | 0 |
| 1794345066 | 4.32 VDC | 22.8 C | 1009.88 hPa | 0 | 0 |
| 1794344163 | 4.27 VDC | 22.8 C | 1009.63 hPa | 0 | 0 |
| 1794343260 | 4.25 VDC | 24.4 C | 1011.38 hPa | 0 | 0 |
| 1794342357 | 4.25 VDC | 26.7 C | 1011 hPa | 0 | 0 |
| 1794341454 | 4.27 VDC | 23.7 C | 1010.88 hPa | 0 | 0 |
| 1794340551 | 4.26 VDC | 22.8 C | 1009.88 hPa | 0 | 0 |
| 1794339648 | 4.32 VDC | 20 C | 1012.13 hPa | 0 | 0 |
| 1794338745 | 4.31 VDC | 20.3 C | 1009.88 hPa | 0 | 0 |
| 1794337842 | 4.3 VDC | 19.1 C | 1011.63 hPa | 0 | 0 |
| 1794336939 | 4.23 VDC | 18.8 C | 1009.25 hPa | 0 | 0 |
| 1794336036 | 4.25 VDC | 18.6 C | 1013.38 hPa | 0 | 0 |
| 1794335133 | 4.3 VDC | 19.3 C | 1012.25 hPa | 0 | 0 |
| 1794334230 | 4.26 VDC | 19.5 C | 1013 hPa | 0 | 0 |
| 1794333327 | 4.3 VDC | 19.7 C | 1012.25 hPa | 0 | 0 |
| 1794332424 | 4.28 VDC | 19.8 C | 1017.13 hPa | 0 | 0 |
| 1794331521 | 4.26 VDC | 19.8 C | 1011.88 hPa | 0 | 0 |
| 1794330619 | 4.26 VDC | 20.4 C | 1010.75 hPa | 0 | 0 |
| 1794329715 | 4.29 VDC | 20.5 C | 1008.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)