This is the latest recevied telemetry packets stored in our database for station/object YE2BDN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790337314 | 35 °C | 42 %RH | 1001 hPa | 0 | 0 |
| 1790336414 | 36 °C | 42 %RH | 1001 hPa | 0 | 0 |
| 1790335514 | 36 °C | 41 %RH | 1001 hPa | 0 | 0 |
| 1790334614 | 36 °C | 40 %RH | 1001 hPa | 0 | 0 |
| 1790333714 | 36 °C | 40 %RH | 1001 hPa | 0 | 0 |
| 1790332814 | 37 °C | 39 %RH | 1000 hPa | 0 | 0 |
| 1790331914 | 37 °C | 37 %RH | 1000 hPa | 0 | 0 |
| 1790331014 | 37 °C | 39 %RH | 1000 hPa | 0 | 0 |
| 1790330114 | 36 °C | 41 %RH | 1000 hPa | 0 | 0 |
| 1790329214 | 36 °C | 41 %RH | 1000 hPa | 0 | 0 |
| 1790328314 | 36 °C | 40 %RH | 1000 hPa | 0 | 0 |
| 1790327414 | 37 °C | 38 %RH | 999 hPa | 0 | 0 |
| 1790326514 | 37 °C | 38 %RH | 999 hPa | 0 | 0 |
| 1790325614 | 37 °C | 37 %RH | 999 hPa | 0 | 0 |
| 1790324714 | 37 °C | 38 %RH | 999 hPa | 0 | 0 |
| 1790323814 | 37 °C | 37 %RH | 1000 hPa | 0 | 0 |
| 1790322914 | 38 °C | 37 %RH | 1000 hPa | 0 | 0 |
| 1790322014 | 38 °C | 37 %RH | 1000 hPa | 0 | 0 |
| 1790321114 | 39 °C | 35 %RH | 1000 hPa | 0 | 0 |
| 1790320214 | 39 °C | 34 %RH | 1000 hPa | 0 | 0 |
| 1790319314 | 39 °C | 32 %RH | 1000 hPa | 0 | 0 |
| 1790318414 | 38 °C | 25 %RH | 1000 hPa | 0 | 0 |
| 1790317514 | 38 °C | 25 %RH | 1000 hPa | 0 | 0 |
| 1790316614 | 38 °C | 26 %RH | 1000 hPa | 0 | 0 |
| 1790315714 | 38 °C | 29 %RH | 1001 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)