This is the latest recevied telemetry packets stored in our database for station/object SP7WOJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786401035 | 434 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786399234 | 431 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786397425 | 429 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786395624 | 426 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786393823 | 424 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786392023 | 421 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786390222 | 420 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786388421 | 417 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786386620 | 415 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786384819 | 413 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786383026 | 410 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786381226 | 408 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786379425 | 405 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786377624 | 403 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786375824 | 401 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786374023 | 399 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786372222 | 396 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786370422 | 394 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786368626 | 392 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786366825 | 389 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786365025 | 387 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786363223 | 383 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786361422 | 382 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786359622 | 379 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786357821 | 377 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)