This is the latest recevied telemetry packets stored in our database for station/object SV9TNF-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext{51* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794349124 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794348346 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794347567 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794346788 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794346011 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794345233 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794344454 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794343675 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794342897 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794342118 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794341340 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794340561 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794339783 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794339004 | 28 VDC | 193 VDC{50 | 0 | 0 | 0 |
| 1794338226 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794337446 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794336669 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794335888 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794335110 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794334331 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794333552 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794332776 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794331998 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794331219 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
| 1794330441 | 28 VDC | 194 VDC{50 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 1, 0
V_Ext{51: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)