This is the latest recevied telemetry packets stored in our database for station/object IR2UAZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792749764 | 12.8 Volt | 0 | 0 | 0 | 0 |
| 1792748564 | 13 Volt | 0 | 0 | 0 | 0 |
| 1792747363 | 13 Volt | 0 | 0 | 0 | 0 |
| 1792746163 | 13 Volt | 0 | 0 | 0 | 0 |
| 1792744963 | 13.2 Volt | 0 | 0 | 0 | 0 |
| 1792743762 | 12.7 Volt | 0 | 0 | 0 | 0 |
| 1792742562 | 13.1 Volt | 0 | 0 | 0 | 0 |
| 1792741362 | 13 Volt | 0 | 0 | 0 | 0 |
| 1792740162 | 13.1 Volt | 0 | 0 | 0 | 0 |
| 1792738961 | 12.7 Volt | 0 | 0 | 0 | 0 |
| 1792737761 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792736561 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792735360 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792734160 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792732960 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792731759 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792730559 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792729359 | 12.3 Volt | 0 | 0 | 0 | 0 |
| 1792728158 | 12.3 Volt | 0 | 0 | 0 | 0 |
| 1792726958 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792725757 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792724557 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792723357 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792722157 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1792720956 | 12.4 Volt | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Batt: 0, 0.1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)