This is the latest recevied telemetry packets stored in our database for station/object AI4SR-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1783185870 | 4.16 V | -13 C | 11 | 1 | 1 |
| 1783185747 | 3.94 V | -13 C | 11 | 1 | 1 |
| 1783185627 | 4.24 V | -13 C | 11 | 1 | 1 |
| 1783185507 | 3.98 V | -11 C | 11 | 1 | 1 |
| 1783185387 | 4.12 V | -9 C | 11 | 1 | 1 |
| 1783185267 | 4.24 V | -15 C | 10 | 1 | 1 |
| 1783185147 | 3.98 V | -14 C | 13 | 1 | 1 |
| 1783185027 | 3.96 V | -16 C | 13 | 1 | 1 |
| 1783184907 | 4.2 V | -16 C | 13 | 1 | 1 |
| 1783184787 | 4.44 V | -10 C | 14 | 1 | 1 |
| 1783184667 | 4.44 V | -10 C | 8 | 1 | 1 |
| 1783184541 | 4.2 V | -11 C | 13 | 1 | 1 |
| 1783184421 | 4.54 V | -12 C | 12 | 1 | 1 |
| 1783184301 | 4.48 V | -17 C | 14 | 1 | 1 |
| 1783184181 | 4.54 V | -7 C | 9 | 1 | 1 |
| 1783184061 | 4.46 V | -10 C | 14 | 1 | 1 |
| 1783183935 | 4.02 V | -15 C | 15 | 1 | 1 |
| 1783183809 | 4.14 V | -13 C | 8 | 6 | 1 |
| 1783183674 | 4.06 V | -11 C | 13 | 1 | 1 |
| 1783183548 | 4.52 V | -10 C | 12 | 1 | 1 |
| 1783183425 | 4.34 V | -7 C | 9 | 1 | 1 |
| 1783183305 | 4.6 V | -7 C | 13 | 1 | 1 |
| 1783183185 | 4.14 V | -16 C | 12 | 1 | 1 |
| 1783183050 | 4.32 V | -11 C | 8 | 1 | 1 |
| 1783182921 | 4.12 V | -10 C | 8 | 1 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)