This is the latest recevied telemetry packets stored in our database for station/object DL6WWM-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1781889626 | 3.91 VDC | 27.7 C | 66.45 % | 1012.75 hPa | 0 |
| 1781886365 | 4.34 VDC | 28.2 C | 65.89 % | 1013.13 hPa | 0 |
| 1781883237 | 4.33 VDC | 27.5 C | 69.08 % | 1013.13 hPa | 0 |
| 1781866118 | 4.33 VDC | 28.9 C | 63.88 % | 1018.5 hPa | 0 |
| 1781865215 | 4.33 VDC | 27.6 C | 66.72 % | 1019.5 hPa | 0 |
| 1781864312 | 4.33 VDC | 26.8 C | 68.92 % | 1016.63 hPa | 0 |
| 1781863409 | 4.33 VDC | 26.2 C | 69.07 % | 1016.5 hPa | 0 |
| 1781862506 | 4.33 VDC | 25.3 C | 73.36 % | 1017.38 hPa | 0 |
| 1781861603 | 4.32 VDC | 24.7 C | 75.83 % | 1015.63 hPa | 0 |
| 1781860700 | 4.32 VDC | 24.1 C | 77.19 % | 1015.88 hPa | 0 |
| 1781859797 | 4.33 VDC | 23.7 C | 78.2 % | 1015.13 hPa | 0 |
| 1781858894 | 4.33 VDC | 22.1 C | 81.9 % | 1016.25 hPa | 0 |
| 1781857991 | 4.32 VDC | 22.2 C | 80.76 % | 1018.5 hPa | 0 |
| 1781857088 | 4.32 VDC | 21.9 C | 0 % | 0 hPa | 0 |
| 1781856185 | 4.35 VDC | 21.6 C | 0 % | 0 hPa | 0 |
| 1781851670 | 4.34 VDC | 20.7 C | 0 % | 0 hPa | 0 |
| 1781846252 | 4.32 VDC | 19.9 C | 0 % | 0 hPa | 0 |
| 1781845349 | 4.33 VDC | 19.9 C | 0 % | 0 hPa | 0 |
| 1781812672 | 4.33 VDC | 19.9 C | 78.17 % | 1018.75 hPa | 0 |
| 1781811769 | 4.33 VDC | 20.5 C | 76.66 % | 1019.13 hPa | 0 |
| 1781810866 | 4.35 VDC | 21 C | 74.87 % | 1020.13 hPa | 0 |
| 1781809963 | 4.35 VDC | 21.7 C | 73.1 % | 1015.25 hPa | 0 |
| 1781809060 | 4.34 VDC | 22.7 C | 70.01 % | 1017 hPa | 0 |
| 1781808157 | 4.31 VDC | 27.4 C | 55.83 % | 1013.38 hPa | 0 |
| 1781808134 | 4.35 VDC | 27.4 C | 55.83 % | 1014.25 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)