This is the latest recevied telemetry packets stored in our database for station/object BL7JV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Baro* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786452406 | 31.3 C | 990 hPa | 0 | 0 | 0 |
| 1786451806 | 31.2 C | 990 hPa | 0 | 0 | 0 |
| 1786451206 | 31.1 C | 990 hPa | 0 | 0 | 0 |
| 1786450606 | 31.2 C | 990 hPa | 0 | 0 | 0 |
| 1786450006 | 31.1 C | 990 hPa | 0 | 0 | 0 |
| 1786449412 | 31 C | 990 hPa | 0 | 0 | 0 |
| 1786448806 | 30.9 C | 990 hPa | 0 | 0 | 0 |
| 1786448206 | 30.8 C | 989 hPa | 0 | 0 | 0 |
| 1786447606 | 31.1 C | 989 hPa | 0 | 0 | 0 |
| 1786445719 | 31.5 C | 989 hPa | 0 | 0 | 0 |
| 1786445130 | 31.3 C | 989 hPa | 0 | 0 | 0 |
| 1786444517 | 30.9 C | 989 hPa | 0 | 0 | 0 |
| 1786444118 | 30.2 C | 989 hPa | 0 | 0 | 0 |
| 1786443319 | 30.2 C | 989 hPa | 0 | 0 | 0 |
| 1786442724 | 30.3 C | 989 hPa | 0 | 0 | 0 |
| 1786442141 | 30.6 C | 989 hPa | 0 | 0 | 0 |
| 1786441554 | 30.7 C | 989 hPa | 0 | 0 | 0 |
| 1786440940 | 30.7 C | 989 hPa | 0 | 0 | 0 |
| 1786438387 | 30.9 C | 989 hPa | 0 | 0 | 0 |
| 1786437787 | 31.3 C | 989 hPa | 0 | 0 | 0 |
| 1786437187 | 31.7 C | 989 hPa | 0 | 0 | 0 |
| 1786436587 | 32.5 C | 989 hPa | 0 | 0 | 0 |
| 1786435987 | 33 C | 989 hPa | 0 | 0 | 0 |
| 1786435387 | 33.3 C | 989 hPa | 0 | 0 | 0 |
| 1786434787 | 33.3 C | 989 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 0.1, 0
Baro: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)