PenangAPRS Track

My position About ☰

reset

E23JWE-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E23JWE-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR *	VBAT*
1782635637	29.66 °C	75.6 %RH	1006.7 hPa	3.8 V
1782634659	29.71 °C	75.1 %RH	1006.8 hPa	3.8 V
1782633687	29.66 °C	76.5 %RH	1006.6 hPa	3.79 V
1782632654	30.46 °C	73.6 %RH	1007.1 hPa	3.8 V
1782631681	29.76 °C	79.8 %RH	1007.2 hPa	3.78 V
1782629683	31.09 °C	69.7 %RH	1007.8 hPa	3.81 V
1782628598	30.38 °C	71.7 %RH	1008 hPa	3.8 V
1782627557	31.28 °C	69.9 %RH	1008.4 hPa	3.8 V
1782626566	30.95 °C	71.5 %RH	1008.6 hPa	3.82 V
1782625590	30.39 °C	75.4 %RH	1008.4 hPa	3.79 V
1782624610	29.88 °C	78.6 %RH	1008.8 hPa	3.8 V
1782623645	29.48 °C	77.7 %RH	1008.5 hPa	3.78 V
1782622601	29.93 °C	75.2 %RH	1008.9 hPa	3.78 V
1782621605	29.5 °C	77.5 %RH	1008.8 hPa	3.78 V
1782620626	29.47 °C	77.6 %RH	1008.9 hPa	3.78 V
1782618682	31.2 °C	71.3 %RH	1009.1 hPa	3.8 V
1782617654	31.1 °C	72.7 %RH	1009.1 hPa	3.79 V
1782616595	30.31 °C	74.8 %RH	1009 hPa	3.78 V
1782615560	30.54 °C	73.6 %RH	1009.1 hPa	3.78 V
1782614526	30.09 °C	78.6 %RH	1009.1 hPa	3.77 V
1782612583	30.17 °C	77.7 %RH	1008.9 hPa	3.76 V
1782611606	29.34 °C	79.8 %RH	1008.7 hPa	3.76 V
1782610613	28.89 °C	83.7 %RH	1008.7 hPa	3.77 V
1782609636	29.61 °C	78.6 %RH	1008.7 hPa	3.76 V
1782608667	30.32 °C	77.1 %RH	1008.7 hPa	3.76 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR : 0, 0.1, 800

VBAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)