This is the latest recevied telemetry packets stored in our database for station/object SQ8IPQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783015267 | 87 Count | 7 Count | 6 Count | 4.29 VDC | 0.14 VDC |
| 1783014941 | 85 Count | 6 Count | 5 Count | 4.24 VDC | 0.14 VDC |
| 1783014896 | 84 Count | 6 Count | 5 Count | 4.28 VDC | 0.16 VDC |
| 1783010256 | 6 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1783008657 | 973 Count | 445 Count | 240 Count | 4.16 VDC | 0.14 VDC |
| 1783008143 | 971 Count | 444 Count | 239 Count | 4.18 VDC | 0.14 VDC |
| 1783008102 | 970 Count | 444 Count | 239 Count | 4.2 VDC | 0.14 VDC |
| 1783008002 | 969 Count | 444 Count | 239 Count | 4.14 VDC | 0.14 VDC |
| 1783007938 | 968 Count | 444 Count | 239 Count | 4.18 VDC | 0.14 VDC |
| 1783007896 | 967 Count | 444 Count | 239 Count | 4.13 VDC | 0.14 VDC |
| 1783007312 | 958 Count | 441 Count | 236 Count | 4.21 VDC | 0.14 VDC |
| 1783007090 | 953 Count | 440 Count | 235 Count | 4.15 VDC | 0.14 VDC |
| 1783006995 | 951 Count | 439 Count | 234 Count | 4.12 VDC | 0.14 VDC |
| 1783006783 | 948 Count | 436 Count | 232 Count | 4.12 VDC | 0.14 VDC |
| 1783005806 | 946 Count | 425 Count | 228 Count | 4.21 VDC | 0.14 VDC |
| 1783005145 | 940 Count | 419 Count | 224 Count | 4.15 VDC | 0.14 VDC |
| 1783004977 | 938 Count | 417 Count | 223 Count | 4.2 VDC | 0.14 VDC |
| 1782997967 | 923 Count | 406 Count | 215 Count | 4.21 VDC | 0.14 VDC |
| 1782997844 | 921 Count | 404 Count | 214 Count | 4.15 VDC | 0.14 VDC |
| 1782995417 | 861 Count | 346 Count | 161 Count | 4.21 VDC | 0.14 VDC |
| 1782987619 | 832 Count | 332 Count | 147 Count | 4.17 VDC | 0.14 VDC |
| 1782987596 | 829 Count | 330 Count | 145 Count | 4.18 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)