This is the latest recevied telemetry packets stored in our database for station/object KL7BB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1782645259 | 4.3 Volts | 9 Deg C | 9 | 1 | 1 |
| 1782587723 | 3.6 Volts | -14 Deg C | 10 | 1 | 1 |
| 1782587597 | 3.86 Volts | -8 Deg C | 12 | 1 | 1 |
| 1782587477 | 3.44 Volts | -11 Deg C | 10 | 1 | 1 |
| 1782587351 | 3.42 Volts | -16 Deg C | 10 | 1 | 1 |
| 1782587219 | 3.28 Volts | -4 Deg C | 10 | 1 | 1 |
| 1782587099 | 3.28 Volts | -7 Deg C | 9 | 1 | 1 |
| 1782586973 | 4.06 Volts | -12 Deg C | 11 | 1 | 1 |
| 1782586853 | 3.54 Volts | 2 Deg C | 9 | 1 | 1 |
| 1782586727 | 3.58 Volts | -6 Deg C | 9 | 6 | 1 |
| 1782586607 | 3.72 Volts | -1 Deg C | 9 | 1 | 1 |
| 1782586475 | 3.72 Volts | 3 Deg C | 9 | 1 | 1 |
| 1782586349 | 3.72 Volts | -6 Deg C | 8 | 1 | 1 |
| 1782586223 | 3.46 Volts | -22 Deg C | 10 | 1 | 1 |
| 1782586103 | 3.82 Volts | -12 Deg C | 11 | 1 | 1 |
| 1782585983 | 3.74 Volts | -12 Deg C | 10 | 1 | 1 |
| 1782585863 | 4.12 Volts | 1 Deg C | 10 | 1 | 1 |
| 1782585743 | 4.04 Volts | 4 Deg C | 10 | 1 | 1 |
| 1782585620 | 4.14 Volts | 6 Deg C | 8 | 6 | 1 |
| 1782585500 | 3.92 Volts | 5 Deg C | 10 | 1 | 1 |
| 1782585374 | 4.16 Volts | -1 Deg C | 10 | 1 | 1 |
| 1782585254 | 4.12 Volts | -3 Deg C | 10 | 1 | 1 |
| 1782585131 | 4.1 Volts | -7 Deg C | 10 | 1 | 1 |
| 1782585005 | 4.24 Volts | -11 Deg C | 10 | 1 | 1 |
| 1782584885 | 4.04 Volts | 0 Deg C | 10 | 1 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)