This is the latest recevied telemetry packets stored in our database for station/object W4PJZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794351357 | 13.42 V | 88.57 Deg.F | 0 | 0 | 0 |
| 1794351293 | 13.45 V | 88.57 Deg.F | 0 | 0 | 0 |
| 1794351232 | 13.48 V | 88.57 Deg.F | 0 | 0 | 0 |
| 1794351154 | 13.54 V | 88.57 Deg.F | 0 | 0 | 0 |
| 1794351081 | 13.57 V | 87.69 Deg.F | 0 | 0 | 0 |
| 1794351076 | 13.6 V | 86.81 Deg.F | 0 | 0 | 0 |
| 1794351065 | 13.62 V | 86.81 Deg.F | 0 | 0 | 0 |
| 1794351047 | 13.6 V | 85.93 Deg.F | 0 | 0 | 0 |
| 1794351010 | 13.6 V | 85.93 Deg.F | 0 | 0 | 0 |
| 1794350935 | 13.62 V | 85.05 Deg.F | 0 | 0 | 0 |
| 1794350860 | 13.71 V | 84.17 Deg.F | 0 | 0 | 0 |
| 1794350785 | 13.74 V | 84.17 Deg.F | 0 | 0 | 0 |
| 1794350776 | 13.68 V | 83.29 Deg.F | 0 | 0 | 0 |
| 1794350756 | 13.8 V | 83.29 Deg.F | 0 | 0 | 0 |
| 1794350377 | 13.8 V | 85.05 Deg.F | 0 | 0 | 0 |
| 1794350287 | 13.92 V | 85.05 Deg.F | 0 | 0 | 0 |
| 1794350212 | 13.92 V | 83.29 Deg.F | 0 | 0 | 0 |
| 1794350137 | 13.98 V | 83.29 Deg.F | 0 | 0 | 0 |
| 1794350036 | 14.01 V | 81.53 Deg.F | 0 | 0 | 0 |
| 1794350022 | 13.98 V | 81.53 Deg.F | 0 | 0 | 0 |
| 1794350002 | 14.01 V | 80.65 Deg.F | 0 | 0 | 0 |
| 1794316523 | 13.98 V | 62.17 Deg.F | 0 | 0 | 0 |
| 1794275303 | 13.68 V | 78.01 Deg.F | 0 | 0 | 0 |
| 1794275284 | 13.65 V | 76.25 Deg.F | 0 | 0 | 0 |
| 1794275280 | 13.71 V | 76.25 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Batt: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)